Industry update — In 2026, market analysts sized the FPGA IP-core market at roughly $1.9B and projected it toward $4.4B by 2033, with soft-IP cores the dominant segment — a sign that licensing proven IP, rather than reinventing protocol logic, has become the default way teams build on FPGAs (QY Research, 2026).
An FPGA IP core is a pre-designed, pre-verified block of logic — a storage controller, a bus interface, a math unit — that you reuse in a design instead of building it from scratch, the hardware equivalent of a software library.
If you are new to FPGA design, “IP core” is one of the first terms that needs demystifying. The concept is simple, but it splits into two very different kinds — soft IP and hard IP — and knowing which is which shapes both what your design can do and what you should build versus license. This explainer makes the distinction concrete.
What an FPGA IP core is
Designing an FPGA from absolute scratch — every function in hand-written logic — would be like writing every program without libraries. An IP core (intellectual property core) exists for the same reason a software library does: someone has already designed and verified a common, hard function, so you reuse it rather than rebuild it. A storage controller, a data-bus interface, a math block — each can be an FPGA IP core you drop in and connect. That reuse is the entire point, and it is why IP reuse is central to how FPGA projects stay on schedule.
Every IP core is one of two types — soft or hard — and the difference is physical.
What is a soft IP core?
A soft IP core is delivered as synthesizable logic (RTL) that the FPGA tools place into the device’s configurable fabric, alongside your own logic. Because it is logic rather than fixed silicon, soft IP is flexible: you can customize it, and the same core can often be ported to different FPGA families. The trade-off is that it consumes fabric resources, and its top speed depends on how it maps to the device.
Most protocol cores are soft IP — a NVMe host core, a SATA host and device core, an ARINC 429 avionics core, or an Ethernet MAC. That is exactly what makes them adaptable to your interfaces and portable across AMD and Altera parts.
What is a hard IP core?
A hard IP core is a fixed function built into the FPGA silicon at manufacture — you use it as the device provides it, not as logic you place. High-speed transceivers, the integrated PCIe block, memory controllers and DSP slices are typical examples. Because they are dedicated silicon, they are faster and more power-efficient than the same function built in fabric — but they are fixed in place, fixed in number, and cannot be moved or reshaped.
This is why family selection matters so much for high-speed work: the hard PCIe tile a family ships determines the link generation you can reach. A soft NVMe host core, for example, runs on top of that hard PCIe block — the pairing behind an Altera Agilex 7 R-Tile Gen5 storage design.
Soft IP vs hard IP: the difference
Soft IP is synthesizable logic placed into the FPGA fabric — flexible and often portable. Hard IP is a fixed function built into the silicon — faster and lower-power, but not movable. Real designs use both: soft IP for the protocol logic, sitting on top of hard IP for the physical interface.
| Property | Soft IP | Hard IP |
|---|---|---|
| Form | Synthesizable logic (RTL) | Fixed silicon block |
| Flexibility | Customizable, often portable | Used as provided by the device |
| Speed / power | Depends on fabric mapping | Faster, more power-efficient |
| Resource cost | Consumes fabric | Dedicated; does not use fabric |
| Portability | Movable across families | Tied to the specific device |
| Typical examples | Protocol controllers (SATA, NVMe host, ARINC 429) | Transceivers, PCIe tile, memory controller, DSP |
Build vs license
The reason engineers license soft IP rather than write it comes down to verification. Implementing a multi-hundred-page protocol is achievable; proving it correct across every corner case and at sustained rate is the expensive, schedule-eating part. A licensed core arrives already verified, turning months of protocol work into an integration task. You build from scratch only when the function is genuinely unique to your application. When you do license, how you vet the IP vendor — verification evidence, support, deliverables — matters as much as the core itself.
Most storage and data-bus problems are already solved by a proven soft core. Tell us the interface and target FPGA, and skip the protocol-writing phase.
What soft IP cores commonly do
In storage and data systems, soft IP cores typically provide:
- Storage controllers — NVMe host and SATA host/device cores that drive or emulate SSDs without a CPU.
- Avionics and data buses — ARINC 429 transmit/receive channels implemented in hardware.
- Connectivity — Ethernet MAC cores for high-speed networking.
- File systems — an exFAT layer that lets an FPGA write OS-readable media with no processor.
- Peripherals — I2C, SPI and UART glue logic.
Selecting, customizing and integrating these cores is the core work of an IP-focused FPGA design house.
What an IP core is not
A few clarifications worth keeping straight:
- An IP core is not a finished product. It is a building block you integrate into a larger design; it still needs to be wired to your logic, verified in context and closed for timing.
- Soft IP is not free of cost in the device. It consumes fabric, so you must budget the core plus your application logic when picking an FPGA.
- Hard IP is not portable. If your design depends on a specific hard block, moving to a family that lacks it changes the design, not just the part number.
Frequently asked questions
What is an FPGA IP core?
An FPGA IP core is a pre-designed, pre-verified block of logic you reuse in a design instead of building it from scratch — the hardware equivalent of a software library. Examples include storage controllers, data-bus interfaces and Ethernet MACs.
What is the difference between soft IP and hard IP?
Soft IP is synthesizable logic (RTL) that the tools place into the FPGA fabric — flexible and often portable. Hard IP is a fixed function built into the silicon, such as a PCIe block or transceiver — faster and lower-power but not movable.
What is soft IP in an FPGA?
Soft IP is an IP core delivered as synthesizable RTL that is synthesized and placed into the FPGA’s configurable logic fabric. Being logic rather than fixed silicon, it can be customized and is often portable across FPGA families.
What is hard IP in an FPGA?
Hard IP is a fixed function built into the FPGA silicon at manufacture — transceivers, an integrated PCIe block, memory controllers or DSP slices. It is faster and more power-efficient than the fabric equivalent but cannot be moved or reshaped.
Why license a soft IP core instead of writing it?
Because the expensive part of a complex protocol is verification, not implementation. A licensed core arrives already verified, turning months of protocol work into an integration task, and freeing your team to build what is truly unique.
Do designs use both soft and hard IP?
Yes, routinely. A soft protocol core such as an NVMe host typically runs on top of the device’s hard PCIe block, combining flexible logic with efficient fixed silicon.
Does soft IP work across different FPGA families?
Often, yes — that is a key advantage of soft IP. Portability depends on the core and the target family’s resources, so confirm support for your exact family when selecting one.
Looking for a proven soft IP core for storage, avionics or connectivity rather than building one from scratch? Browse the catalog or tell us what you need.
